Construction Workers Leveling Up in Skill

This guy in the first clip needs to told there is a simple and pretty cheap machine that can lift drywall for you. Where you just lift the board on and spinn a weel with a chain on that lifts it up.Those guys doing the pavers & concrete work – no back brace, good luck. […]

This guy in the first clip needs to told there is a simple and pretty cheap machine that can lift drywall for you. Where you just lift the board on and spinn a weel with a chain on that lifts it up.Those guys doing the pavers & concrete work – no back brace, good luck. See how you feel after 10 years or when you hit 40. Nice job with the epoxy floor, that’s what I’d do if I had a garage. Guess they don’t have access to a panel lift – there’s another guy who’s gonna end up with back & rotator problems doing it that way.If I saw two guys holding a sheet of lath I would fire them. Also, why the hell do you need to install corner bead on a stone wall. Also, why the hell are you using roofing nails to fasten your 15# felt paper to the plywood. Stapling would be so much faster. Also, where is your flashing under the stone. Also, the staple gun used to shoot off the lath wouldn’t hold the weight. Also, if this was done in the Northern regions like Minnesota and Wisconsin. With all those nails in the cavity of the wall. You are asking for moisture and mold issues.

Sosyal Medyada Paylaşın:

BİRDE BUNLARA BAKIN

Düşüncelerinizi bizimle paylaşırmısınız ?