Amazing Circular Saw Blades for Wood Cutting and Finger Joint Constructional Timber Line Machines

There are four basic blade types, determined by the shape, or grind, of their teeth. They are flat top grind (FTG), alternate top bevel (ATB), combination (ATBR), and triple-chip grind (TCG) [Figure 1 and Photo A]. FTG blades have teeth whose top edges are square to the saw plate.The number of teeth on the blade helps determine the speed, type […]

There are four basic blade types, determined by the shape, or grind, of their teeth. They are flat top grind (FTG), alternate top bevel (ATB), combination (ATBR), and triple-chip grind (TCG) [Figure 1 and Photo A]. FTG blades have teeth whose top edges are square to the saw plate.The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish. Gullets between the teeth remove chips from the work pieces.A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.

Sosyal Medyada Paylaşın:

BİRDE BUNLARA BAKIN

Düşüncelerinizi bizimle paylaşırmısınız ?